If the lid foam in your Peli Air 1615 case has started to flatten, crumble, or simply lost its grip after years of loyal service, this genuine blue replacement lid foam is exactly what you need to bring your case back to its protective best. Designed as a drop-in match for the lid (the top half) of the Peli Air 1615, this vivid blue wave-pattern foam restores the gentle, even pressure that holds your gear firmly in place every time you close the lid. It is the same convoluted "egg-crate" style foam Peli builds for this case, so you get a precise fit without the trimming, gaps, or guesswork that come with generic aftermarket sheets.

What This Replacement Lid Foam Is

This is the lid portion of the foam set for the Peli Air 1615 case, finished in a bright, eye-catching blue. The lid foam is the convoluted (wave) layer that sits inside the closed lid and presses down against whatever you store in the base. Over time, the original foam can compress, tear at the peaks, or absorb moisture and odours, and once that happens it no longer holds equipment securely. Swapping in fresh foam is the fastest, most affordable way to make an older case feel brand new again.

Colour: Blue convoluted wave foam, a deliberate contrast to the standard black Peli interior.
Type: Wave / "egg-crate" pattern lid foam, not a flat insert.
Designed for: The lid (upper half) of the Peli Air 1615 case.
Function: Cushions and retains contents from above when the case is closed.

Why Replace Your Lid Foam?

Foam is a wear item. It is the only part of a Peli case engineered to give and flex, and that is exactly why it eventually needs renewing while the rugged shell soldiers on. There are several good reasons to fit a fresh blue lid foam:

Lost grip: Compressed or sagging foam stops applying even pressure, letting gear shift, rattle, and rub during transport.
Damage: Torn peaks, crumbling edges, or a foam layer that has started shedding particles onto your equipment.
Hygiene: Older foam can hold dust, moisture, and odours; a clean replacement is the simple fix.
Visibility upgrade: Switching from black to blue brightens the inside of the lid, making it far easier to spot small parts in low-light or on a dim job site.
Repurposing: Refreshing the foam when you change what the case carries gives you a clean slate that grips your new kit properly.

Which Case Does It Fit?

This lid foam is made specifically for the Peli Air 1615. The Air series is Peli's lightweight line, so this foam is cut to the exact lid geometry of the 1615 and nothing else. Using foam sized for the correct case matters: the dimensions, depth, and wave profile are all tuned so the layer seats flush inside the lid and closes without bunching or leaving dead space. If your case is a Peli Air 1615, this blue lid foam will drop straight in.

Genuine Foam vs. Aftermarket Alternatives

It is tempting to grab a cheap foam sheet and cut it down yourself, but there are real advantages to fitting foam made for this case. Generic foam is rarely the right density: too soft and it won't hold your gear, too firm and it crushes delicate items or stops the lid closing cleanly. It also has to be measured and trimmed by hand, which is fiddly and easy to get wrong, leaving uneven edges and gaps. Foam designed for the 1615 lid arrives pre-sized with the correct thickness and wave depth, so it performs the way the case was meant to from the moment it goes in.

Correct density for reliable retention without crushing contents.
Pre-cut to the lid — no measuring, no trimming, no waste.
Consistent wave profile that mates properly with the base foam below.
Clean, professional finish that looks the part inside a premium case.

How to Install It

Replacing the lid foam is a quick, tool-free job that most people finish in a couple of minutes:

Step 1: Open the case fully and remove the old lid foam. It is held in place by friction and a light adhesive backing, so it usually peels away with steady hand pressure.
Step 2: Wipe out the inside of the lid to clear any old adhesive residue, foam crumbs, or dust so the new layer beds down evenly.
Step 3: Orient the new blue foam so the wave (convoluted) side faces inward, toward the contents, and the flat side sits against the lid.
Step 4: Press the foam firmly into place across the whole surface, working from the centre outward to avoid trapping air.
Step 5: Close the case and check the fit. The foam should make gentle, even contact with whatever is in the base.

Because this is a simple foam swap and does not alter the case shell, latches, or seal in any way, it does not affect the structural integrity of your Peli Air 1615 or its protective performance.

Make Your Case Stand Out

Beyond the practical benefits, the bright blue foam is a genuine visual upgrade. The vivid blue contrasts strikingly against the black Peli shell for a distinctive, professional look, and it makes a busy case far easier to identify at a glance on a shared shoot, in a kit room, or among a stack of identical black cases. It is a small change that gives a hard-working case a fresh, premium feel inside and out.

At a Glance

Product: Replacement lid foam for the Peli Air 1615
Colour: Blue
Pattern: Convoluted wave ("egg-crate") foam
Fits: Peli Air 1615 case lid
Installation: Tool-free, drop-in replacement

Peli Foam Inserts

Price

Collections

Peli Air 1535 Replacement Blue Lid Foam

Peli Air 1615 Replacement Blue Lid Foam

Peli Air 1535 Replacement Lid Foam Yellow