Peli Vault V700 Takedown Case
The Peli™ Vault V700 Takedown Case is a long, rugged equipment case built around one problem that shorter cases can't solve: how do you carry something long — a broken-down rifle, a shotgun, a tripod, a set of C-stands or LED tubes — without it flexing, rattling, or taking up half a vehicle? At just under a metre wide and a slim 16.9 cm deep, the V700 is sized for exactly that kind of long, slender gear, with a customisable foam interior and weather-resistant construction to keep it protected in transit.
Built Tough
The shell is a single high-impact polypropylene moulding — crushproof, dustproof and weather-resistant, sealed along the lid by a polymer O-ring gasket. Four push-button latches clamp the case shut with an even, secure grip, yet open in seconds when you need access. Stainless-steel hinge pins run the length of the lid, heavy-duty ergonomic handles make a long, loaded case easier to carry solo, and a padlockable hasp lets you secure the contents at a range, in a vehicle, or in transit. Note: Vault cases are weather- and water-resistant, not submersible like Peli's Protector or Air ranges — the right choice when you need serious protection without needing an airtight dive-rated seal.
Four Layers of Foam, Nothing Shifts
Inside, the V700 ships with four layers of protective foam that can be customised — pulled, cut or configured — to cradle a takedown rifle, a broken-down shotgun, long instruments, tripod legs or awkward accessories so nothing shifts, knocks or wears against the shell during transport. For vehicle or roof-rack mounting, an optional LGMT-001V Vault Case Roof Mount is available separately.
What It's For
The V700 is built for takedown and broken-down rifles and shotguns, tripods and C-stands, LED lighting tubes, musical instruments and long, slim optics and accessories — anything that's awkward to protect because of its length rather than its bulk. It suits hunters and sport shooters moving a takedown rifle between the safe and the range, film and photo crews shipping light stands and C-stands between locations, and musicians or technicians who need lockable, rugged transport for long gear that doesn't fit a standard case.
Living With Your V700
Wipe the shell down with mild soap and water after dusty or muddy trips — avoid solvents, which can degrade the polypropylene over time. Keep the O-ring free of grit and check it periodically, since a dirty or damaged seal is the most common cause of reduced weather resistance. If a hinge pin ever needs to be replaced, knock it out with a punch and hammer rather than a screwdriver, and tap the new pin back in the same way — this keeps the hinge alignment true and avoids marring the hole. Store the case latched but not padlocked when not travelling, to keep the O-ring seated evenly, and let the foam breathe by leaving the lid cracked open during long storage periods.
Technical Overview
Interior 92.7 × 36.8 × 15.2 cm; exterior 100.6 × 44.8 × 16.9 cm; internal volume 0.052 m³. Polypropylene body, four push-button latches, four-layer foam included. Weight with foam 7.38 kg. Colour: Black. Backed by Peli's lifetime guarantee.
The Peli™ Vault V700 Takedown Case is a long, rugged equipment case built around one problem that shorter cases can't solve: how do you carry something long — a broken-down rifle, a shotgun, a tripod, a set of C-stands or LED tubes — without it flexing, rattling, or taking up half a vehicle? At just under a metre wide and a slim 16.9 cm deep, the V700 is sized for exactly that kind of long, slender gear, with a customisable foam interior and weather-resistant construction to keep it protected in transit.
Built Tough
The shell is a single high-impact polypropylene moulding — crushproof, dustproof and weather-resistant, sealed along the lid by a polymer O-ring gasket. Four push-button latches clamp the case shut with an even, secure grip, yet open in seconds when you need access. Stainless-steel hinge pins run the length of the lid, heavy-duty ergonomic handles make a long, loaded case easier to carry solo, and a padlockable hasp lets you secure the contents at a range, in a vehicle, or in transit. Note: Vault cases are weather- and water-resistant, not submersible like Peli's Protector or Air ranges — the right choice when you need serious protection without needing an airtight dive-rated seal.
Four Layers of Foam, Nothing Shifts
Inside, the V700 ships with four layers of protective foam that can be customised — pulled, cut or configured — to cradle a takedown rifle, a broken-down shotgun, long instruments, tripod legs or awkward accessories so nothing shifts, knocks or wears against the shell during transport. For vehicle or roof-rack mounting, an optional LGMT-001V Vault Case Roof Mount is available separately.
What It's For
The V700 is built for takedown and broken-down rifles and shotguns, tripods and C-stands, LED lighting tubes, musical instruments and long, slim optics and accessories — anything that's awkward to protect because of its length rather than its bulk. It suits hunters and sport shooters moving a takedown rifle between the safe and the range, film and photo crews shipping light stands and C-stands between locations, and musicians or technicians who need lockable, rugged transport for long gear that doesn't fit a standard case.
Living With Your V700
Wipe the shell down with mild soap and water after dusty or muddy trips — avoid solvents, which can degrade the polypropylene over time. Keep the O-ring free of grit and check it periodically, since a dirty or damaged seal is the most common cause of reduced weather resistance. If a hinge pin ever needs to be replaced, knock it out with a punch and hammer rather than a screwdriver, and tap the new pin back in the same way — this keeps the hinge alignment true and avoids marring the hole. Store the case latched but not padlocked when not travelling, to keep the O-ring seated evenly, and let the foam breathe by leaving the lid cracked open during long storage periods.
Technical Overview
Interior 92.7 × 36.8 × 15.2 cm; exterior 100.6 × 44.8 × 16.9 cm; internal volume 0.052 m³. Polypropylene body, four push-button latches, four-layer foam included. Weight with foam 7.38 kg. Colour: Black. Backed by Peli's lifetime guarantee.
Original: $341.60
-65%$341.60
$119.56Description
The Peli™ Vault V700 Takedown Case is a long, rugged equipment case built around one problem that shorter cases can't solve: how do you carry something long — a broken-down rifle, a shotgun, a tripod, a set of C-stands or LED tubes — without it flexing, rattling, or taking up half a vehicle? At just under a metre wide and a slim 16.9 cm deep, the V700 is sized for exactly that kind of long, slender gear, with a customisable foam interior and weather-resistant construction to keep it protected in transit.
Built Tough
The shell is a single high-impact polypropylene moulding — crushproof, dustproof and weather-resistant, sealed along the lid by a polymer O-ring gasket. Four push-button latches clamp the case shut with an even, secure grip, yet open in seconds when you need access. Stainless-steel hinge pins run the length of the lid, heavy-duty ergonomic handles make a long, loaded case easier to carry solo, and a padlockable hasp lets you secure the contents at a range, in a vehicle, or in transit. Note: Vault cases are weather- and water-resistant, not submersible like Peli's Protector or Air ranges — the right choice when you need serious protection without needing an airtight dive-rated seal.
Four Layers of Foam, Nothing Shifts
Inside, the V700 ships with four layers of protective foam that can be customised — pulled, cut or configured — to cradle a takedown rifle, a broken-down shotgun, long instruments, tripod legs or awkward accessories so nothing shifts, knocks or wears against the shell during transport. For vehicle or roof-rack mounting, an optional LGMT-001V Vault Case Roof Mount is available separately.
What It's For
The V700 is built for takedown and broken-down rifles and shotguns, tripods and C-stands, LED lighting tubes, musical instruments and long, slim optics and accessories — anything that's awkward to protect because of its length rather than its bulk. It suits hunters and sport shooters moving a takedown rifle between the safe and the range, film and photo crews shipping light stands and C-stands between locations, and musicians or technicians who need lockable, rugged transport for long gear that doesn't fit a standard case.
Living With Your V700
Wipe the shell down with mild soap and water after dusty or muddy trips — avoid solvents, which can degrade the polypropylene over time. Keep the O-ring free of grit and check it periodically, since a dirty or damaged seal is the most common cause of reduced weather resistance. If a hinge pin ever needs to be replaced, knock it out with a punch and hammer rather than a screwdriver, and tap the new pin back in the same way — this keeps the hinge alignment true and avoids marring the hole. Store the case latched but not padlocked when not travelling, to keep the O-ring seated evenly, and let the foam breathe by leaving the lid cracked open during long storage periods.
Technical Overview
Interior 92.7 × 36.8 × 15.2 cm; exterior 100.6 × 44.8 × 16.9 cm; internal volume 0.052 m³. Polypropylene body, four push-button latches, four-layer foam included. Weight with foam 7.38 kg. Colour: Black. Backed by Peli's lifetime guarantee.
